Billet Shifter Plate Baseplate For Honda Acura Accord TSX K Swap K20 K24 DC2 EF
$54.75
Skip to product information
Billet Shifter Plate Baseplate For Honda Acura Accord TSX K Swap K20 K24 DC2 EF
$54.75
Vehicle Fitment
Verified fitment data is available for 18 vehicle applications.
View verified Year / Make / Model fitment
- 2006 Acura TSX
- 2007 Acura TSX
- 2008 Acura TSX
- 2009 Acura TSX
- 2010 Acura TSX
- 2011 Acura TSX
- 2006 Honda Accord
- 2007 Honda Accord
- 2008 Honda Accord
- 2009 Honda Accord
- 2010 Honda Accord
- 2011 Honda Accord
6 additional applications are included in the fitment data.
Secure checkout
Verify Year / Make / Model before purchase
✓ Checkout: Shop Pay, Apple Pay and Google Pay available where supported.
✓ Shipping: Shipping options and rates are shown at checkout.
✓ Returns: Review our Refund Policy before ordering.
Billet Shifter Plate Baseplate For Honda Acura B Series B16 B18 DC2 AWD EK EG
Our Billet Shifter Base Plate is designed to install (TSX/Accord Shifter) or OEM Accord/TSX Shifter in EF/EG/EK/DC2.
- This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering.
- The Shifter Base Plate was designed to route your shifter cables inside the car.
- Generally users set them up to exit through the heater hose hole in the firewall. Note that we are assuming the heater core has been deleted on most race cars.
- We also want users to be aware that this shifter setup does not clear any interior panels or center consoles on any chassis.
- This shifter setup is gaining in popularity because it can be used on a K-Swap car with the newer 06-11 Civic SI trans (also referred to as the K20Z3 trans) or K24 TSX or Accord transmissions